| Model |
Features |
RTIV535HEU3
with built-in eSATA and USB 3.0
Click for detailed illustration |
- Connect to system via USB 3.0 / 2.0 or eSATA port (connecting cables included).
- Install up to five 3.5" SATA hard drives of any capacity (drives not included).
- three drives are installed onto drive tray that can be added or removed like tape cartridge from each drive bay, two drives can be added or removed like tape cartridge from the drive bay with no special tool required.
- Drives can be configured as FAST (RAID0 Striping), SAFE (RAID1 Mirroring), JBOD* (Just a Bunch Of Disks or individual drive), BIG (combined single volume), SAFE FAST (RAID 1+0 Mirror Stripped).
- RAID setting via software utility under Windows
- OS independent, can be used on any system when all drives are configured as a single RAID volume.
- RAID diagnostic software utility (for Windows only)
Components list made up this model:
Storage Tower (STMPC-B) with SCSI-I back panel,
5-port HPM-XU (AD5HPMREU), one Disk Array 3SA (AE3RCS35NSA), two Snap-In Mobile Rack (AESNAPMRSA), 6 feet USB 3.0 cable (AAU3AB6F), 3 feet eSATA cable (AAESATA100C) |
RTIV35M2SU3
with built-in eSATA and USB 3.0
Click for detailed illustration |
- Connect to system via USB 3.0 / 2.0 or eSATA port (connecting cables included).
- Install up to three 3.5" SATA hard drives of any capacity (drives not included).
- Install up to two 2.5" SATA hard drive of any capacity (drives not included).
- Drives are added or removed like tape cartridge from each drive bay with no special tool required.
- Drives can be configured as FAST (RAID0 Striping), SAFE (RAID1 Mirroring), JBOD* (Just a Bunch Of Disks or individual drive), BIG (combined single volume), SAFE FAST (RAID 1+0 Mirror Stripped).
- RAID setting via software utility under Windows
- OS independent, can be used on any system when all drives are configured as a single RAID volume.
- RAID diagnostic software utility (for Windows only)
Components list made up this model:
Storage Tower (STMPC-B with SCSI-I back panel),
5-port HPM-XU (AD5HPMREU), 3 units Snap-In Mobile Rack (AESNAPMRSA), 1 unit Snap-In Double Drive (AE25SNAP2SA), 3 feet eSATA cable (AAESATA100C), 6 feet USB 3.0 cable (AAU3AB6F) |
RTIV435DCSR5
Click for detailed illustration |
- Connect to system via USB 2.0 or eSATA port (connecting cables included).
- Install up to four 3.5" SATA hard drives of any capacity (drives not included).
- Drives are installed onto drive enclosures that can be added or removed like tape cartridge from each drive bay.
- Drives can be configured as FAST2 (2 drive RAID 0 Striping),, SAFE2 (RAID1 Mirroring), SAFE FAST (RAID 1+0 Mirrored Stripped), BIG 2 (2 drives Concatenation), FAST4 (4 drive RAID 0 Striping), BIG 4(4 drives Concatenation), RAID 1+0, RAID 5 over 4 drives, or RAID 5+S.
- RAID setting via a rotary switch on the back.
- OS independent, can be used on any system.
- RAID diagnostic via LED lights.
- Can install 3.5" IDE hard drive using optional Diamond IDE drive enclosure. 2.5" SATA or IDE hard drives can also be install with optional bracket and connector adapter.
Components list made up this model:
Storage Tower (STMPC-B with SCSI-I back panel),
4X1 eSATA / USB 2.0 Hardware Port Multiplier (AD4SR5HPMU-E), 4 units Diamond Drive Cartridge System for SATA hard drive (DDCSSAS), 6 feet A-B USB cable (AAUSBAB6F), 3 feet eSATA cable (AAESATA100C)
Optional USB 3.0 - eSATAp adapter (ADU3ESA) for USB 3.0 connection |
RTIV435SMR5
Click for detailed illustration |
- Connect to system via USB 2.0 or eSATA port (connecting cables included).
- Install up to four 3.5" SATA hard drives of any capacity (drives not included).
- Drives are added or removed like tape cartridge from each drive bay with no special tool required.
- Drives can be configured as FAST2 (2 drive RAID 0 Striping),, SAFE2 (RAID1 Mirroring), SAFE FAST (RAID 1+0 Mirrored Stripped), BIG 2 (2 drives Concatenation), FAST4 (4 drive RAID 0 Striping), BIG 4(4 drives Concatenation), RAID 1+0, RAID 5 over 4 drives, or RAID 5+S.
- RAID setting via a rotary switch on the back.
- OS independent, can be used on any system.
- RAID diagnostic via LED lights.
Components list made up this model:
Storage Tower (STMPC-B with SCSI-I back panel),
4X1 eSATA / USB 2.0 hardware Port Multiplier (AD4SR5HPMU-E), 4 units Snap-In Mobile Rack (AESNAPMRSA), 6 feet A-B USB cable (AAUSBAB6F), 3 feet eSATA cable (AAESATA100C)
Optional USB 3.0 - eSATAp adapter (ADU3ESA) for USB 3.0 connection |
RTIV535ES
Click for detailed illustration |
- Great for adding 5 drives to any system with no RAID
- Install up to five 3.5" SATA hard drives of any capacity (drives not included).
- three drives are installed onto drive tray that can be added or removed like tape cartridge from each drive bay, two drives can be added or removed like tape cartridge from the drive bay with no special tool required.
- Drives can be set to RAID via the software utility of the controller or the OS
- Must connect to Port Multiplier compatible controller
- RAID diagnostic via LED light
Components list made up this model:
Storage Tower (STMPC-B) with SCSI-I back panel,
5x1 Port Multiplier
(AD5SARPM-E), one Disk Array 3SA (AE3RCS35NSA), two Snap-In Mobile Rack (AESNAPMRSA), 3 feet eSATA cable (AAESATA100C) |
|
