Storage Rack Optional Accessories

Cables and Brackets

Model	Description and Package Content (All external SATA cables are constructed with extra cable shielding to reduce EMI and improved signal integrity over 2 meter distance. Connector shell is constructed with metal clip for tighter connection and durability in external application. )
AASA2SAP15C	eSATA2 - SATA converter cable, 15cm (convert eSATA port to standard standard SATA port)
AASAIDC18I	Internal SATA Data Cable, 18" cable length
AASA90L13C	Left angle 13 cm. internal SATA cable, 13 cm. cable length
AASAEDC3F	External SATA data cable - 100 cm (standard female SATA connector on both ends)
AASA2SA100C	eSATA - SATA cable, 100 cm (connect storage device with standard SATA port to controllers with eSATA port)
AAESATA100C	eSATA - eSATA cable, 100 cm (eSATA ports on both ends of cables)
AAESATA200C	eSATA - eSATA cable, 200 cm (eSATA ports on both ends of cables)
AAUSB308-4C	4 USB 2.0 USIB interface cables bundled in corrugated tubing use on back panels with USIB connectors
AAUSBC-309	1 USB USIB interface cable
AAFW-4C	4 Firewire/iLink USIB interface cables bundled in corrugated tubing use on back panels with USIB connectors
AAFWC406	1 Firewire/iLink USIB interface cable
AAIB4C150	Infiniband 4X MultiLane eSATA cable, 150 cm
AAIDE80-18	IDE Ribbon Cable, 18" cable length
AAU2ESA	USB 2.0 to eSATA Adapter Converts any eSATA device (or SATA device with converter cable) to connect to any available computer with USB 2.0 ports. This adapter is compatible with all the port multipliers, allowing the possibility of connecting up to 5 hard drives through a single USB 2.0 port.
AAHDMK53	5 1/4" drive bay mounting bracket for 3.5" hard drive
AAMK53	5 1/4" drive bay mounting bracket for 3.5" removable drive such as Addonics internal DigiDrive, 2.5" Mobile Rack, MO or Iomega ZIP

Devices that can be installed on the Internal Mounting Poles

Model	Description and Package Content
	Internal SATA Port Multiplier (AD5SAPM) to connect up to 5 SATA devices through a single SATA cable. The single SATA cable can then be connected to the Multilane or 4 eSATA ports bracket mounted on the back panel for external connection.
	5X1 Hardware Port Multiplier (AD5SAHPM-E) to connect up to 5 SATA devices through a single eSATA cable. The single eSATA cable can then be connected to the Multilane or 4 eSATA ports bracket mounted on the back panel for external connection. This PM can be mounted internally by removing the metal bracket.
	2X1 eSATA / USB 2.0 Hardware Port Multiplier (AD2SAHPMEU) To connect up to 2 SATA devices through a single eSATA cable. The single eSATA cable can then be connected to the Multilane or 4 eSATA ports bracket mounted on the back panel for external connection. This PM can be mounted internally by removing the metal bracket.

Devices that can be installed on the Rear Panel

Model	Description and Package Content (All external SATA cables are constructed with extra cable shielding to reduce EMI and improved signal integrity over 2 meter distance. Connector shell is constructed with metal clip for tighter connection and durability in external application. )
SCSI1 (Centronics 50-pin) - 2 total slots available on the Storage Rack
	4 Port eSATA Bracket (AD4ESASB) A bridge to connect up to 4 internal SATA devices externally using 4 individual eSATA cables.
	5X1 Rackmount Port Multiplier (ADSARPM-E) A Port Multiplier to connect up to 5 internal SATA devices externally using a single eSATA cable. Requires PM compatible eSATA controller on the computer. Can also connect to USB using optional eSATA - USB adapter
	5X1 Hardware Port Multiplier (AD5SAHPM-E) A Hardware Port Multiplier to connect up to 5 internal SATA devices externally using a single eSATA cable. Once configured, the connection can be attached to any eSATA port. Can also connect to USB using optional eSATA - USB adapter
	2X1 eSATA / USB 2.0 Hardware Port Multiplier (AD2SAHPMEU) A Hardware Port Multiplier to connect up to 2 internal SATA devices externally using a single eSATA cable or USB cable
	Infiniband 4X Multilane Bridge (AD4SAML) A bridge to connect up to 4 internal SATA devices externally using a Multilane 4X cable.
USIB punch outs - 9 total slots available on the Storage Rack
	IDE - USIB connector PCB Kit (ADIDEUSPCB) Convert an IDE device to USIB connection that can connect to USB, eSATA, or Firewire interface using one of the Addonics optional USIB interface cables.
eSATA punch out - 1 total slot available on the Storage Rack
	1 eSATA port PCI bracket (AASATAB-E) To convert one a SATA device to eSATA connection

Power Supplies and Power Connectors

Model	Description and Package Content
	ATX power supply 380W model: AATXPS380
	Redundant power supply 300W model: AARDPS300
	Adapter for 15-pin SATA power to standard 4P power connector model: AASA4PPC
	Adapter for standard 4P power to 15-pin SATA power connector model: AA4PSAPC
	4P male to 2 4P female Y cables model: AA4PYCBL