 |
External Serial ATA-USIB interface cable Designed to turn any Addonics DVD, CDRW, CD-ROM, DVD/CDRW, DVD+/-R/RW, Pocket ExDrive or Combo Hard Drive into a high performance external Serial ATA device. Model - AASAC-605 |
 |
USB 2.0 - USIB interface Cable For use with the following Addonics External Storage devices: Pocket CD, Pocket DVD, Pocket CDRW, Pocket DVD/CDRW, Pocket DVD+/-R/RW, Pocket ExDrive. Mobile CDRW, Combo Hard Drive, Mobile DVD/CDRW, Mobile DVD+/-R/RW, DVD DigiCopier, CD DigiCopier. Model - AAUSBC-309 |
 |
USB 2.0 Repeater Cable Unlike ordinary USB extension cable, this USB repeater cable assures signal quality and maintains electrical and timing specifications are in full compliance with USB 2.0/1.1 standard at the end of the 16 feet distance. Power directly from USB port, up to 5 of this USB Repeater cables can be chained together for a maximum distance up to 80 feet. Model - AAU2REPEAT16 |
 |
Firewire/1394 - USIB interface Cable For use with the following Addonics Storage Devices: Pocket CD, Pocket DVD, Pocket CDRW, Pocket DVD/CDRW, Pocket DVD+/-R/RW, Pocket ExDrive. Mobile CDRW, Combo Hard Drive, Mobile DVD/CDRW, Mobile DVD+/-R/RW, DVD DigiCopier, CD DigiCopier. Model - AAFWC406 |
 |
PCMCIA card - USIB interface Cable Compatible with Pocket CD, Pocket DVD, Pocket CDRW, Pocket DVD/CDRW, Pocket DVD+/-R/RW, Pocket ExDrive. Mobile CDRW, Combo Hard Drive, Mobile DVD/CDRW, Mobile DVD+/-R/RW, DVD DigiCopier, CD DigiCopier. Model - AAPCMCIA2 |
 |
32-Bit CardBus/ 16 bit PCMCIA card - USIB interfaceCable For users with Addonics Pocket series product- When using CardBus/PCMCIA-USIB interface, only the PCMCIA mode can provide direct power to the Addonics Pocket drive. However, operating in PCMCIA model reduces the performance of the drive and results in lower frame rate in playing DVD movie. The alternatve is to use the USB power cable that comes with your drive to get power from the computer to the drive or use the AC/DC power adapter when using the interface cable in CardBus mode. |