|
| USIB Universal Interface Cables |
|
 | AASAC-605 - USIB Serial ATA interface cable | | $62.00 | |
| AASAC-605 Serial ATA-USIB interface cable that converts any Addonics Pocket, Mobile, Combo Hard Drive IDE and DigiCopier series storage into external Serial ATA storage device. Comes with integrated USB power cable to provide BUS power to Pocket storage devices. | | |
| | |
|
 | AASA605-4C - 4 External USIB SATA interface cable in corrugated tubing | | $303.00 | |
| 4 Internal Serial ATA USIB interface cable in a corrugated tubing. For use on Addonics 4-slot UDD or multiple Addonics storage devices with USIB connector. | | |
| | |
|
 | AASAC-605E - USIB eSATA interface cable | | $72.00 | |
| External Serial ATA eSATA-USIB interface cable that converts any Addonics Saturn, Jupiter, Pocket UDD and CUDD, Pocket Series, Mobile, Combo Hard Drive IDE and DigiCopier series storage into external Serial ATA storage device with more secured cable conneimproved durability, increased EMI protection and up to 2 meters cable length. Comes with integrated USB power cable to provide BUS power to Pocket storage devices. | | |
| | |
|
 | AASA605E-4C - Bundle of 4 eSATA USIB cables | | $305.00 | |
| 4 eSATA USIB interface cable in a corrugated tubing. For use on Addonics 4-slot UDD or multiple Addonics storage devices with USIB connector. | | |
| | |
|
 | AAUSBC-309-3F - USB 2.0 USIB interface cable, 3 feet | | $55.00 | |
| 3-foot USB 2.0/1.1 USIB interface cable. Replacement for AAUSBC-308-3F. Can be used on any Addonics storage device equipped with the USIB connector. | | |
| | |
|
| AAUSBC-309 - USB 2.0 USIB interface cable | | $55.00 | |
| USB 2.0/1.1 USIB interface cable. Replacement for the previous part # AAUSBC-308. This cable can be used on any Addonics storage products equipped with the USIB connector. | | |
| | |
|
 | AAUSBCI3F - Int. USB 2.0 USIB, 3 FT for CPU board. | | $62.00 | |
| Internal 3 feet USB 2.0 USIB cable with pin header adapter cable for connection to USB port on motherboard.3-foot USB USIB interface cable (AAUSBC-308-3F) & USB 5-pin header adapter cable for motherboard connection (AAUSB5F) | | |
| | |
|
| AAUSB308-4C - Addonics Bundle of 4 USB 2.0 USIB cables | | $208.00 | |
| 4 Addonics USB 2.0 USIB interface cables bundled in a corrugated tubing. Cable length - 6 feet. Designed to use with Addonics 4 slot UDD or multiple Addonics storage devices with USIB-36 connector. | | |
| | |
|
 | AAFWC-406 - Addonics Firewire cable - USIB interface | | $87.00 | |
| Firewire USIB interface cable for Addonics Pocket and Mobile Series storage devices. | | |
| | |
|
 | AAPCMCIA32 - PCMCIA 32 Bit CARDBUS | | $79.00 | |
| Cardbus USIB interface cable. | | |
| | |
|
 | AAFWC-406R - Firewire/iLink USIB interface cable | | $81.00 | |
| USIB Firewire cable, 6 feet and RoHS compliant. Replace previous part # AAFWC406. | | |
| | |
|
| AAFWC406R - Firewire/iLink USIB interface cable | | $101.00 | |
| USIB Firewire cable, 6 feet and RoHS compliant. Replace previous part # AAFWC-406. | | |
| | |
|
 | AAFW-4C - bundle of 4 Firewire USIB cabes | | $305.00 | |
| 4 3-foot Firewire/iLink USIB interface cables bundled in corrugated tubing. For use with Addonics Storage Tower | | |
| | |
|
*All prices are in New Zealand Dollars and exclude GST & freight. Reseller enquiries welcome. |
|
| SATA Cables |
|
 | AAIB4C150 - IB Multilane 4X SATA cable, 150 cm | | $127.00 | |
| Infiniband 4X Multilane SATA cable. 150 cm with secure thumb screws. Compliant with SFF 8470 and includes SATA2 blocking keys. | | |
| | |
|
| AASAC-605 - USIB Serial ATA interface cable | | $62.00 | |
| AASAC-605 Serial ATA-USIB interface cable that converts any Addonics Pocket, Mobile, Combo Hard Drive IDE and DigiCopier series storage into external Serial ATA storage device. Comes with integrated USB power cable to provide BUS power to Pocket storage devices. | | |
| | |
|
| AASA605-4C - 4 External USIB SATA interface cable in corrugated tubing | | $303.00 | |
| 4 Internal Serial ATA USIB interface cable in a corrugated tubing. For use on Addonics 4-slot UDD or multiple Addonics storage devices with USIB connector. | | |
| | |
|
 | AASAIDC18I - Addonics 18" internal Serial ATA data cable | | $10.90 | |
| 18" internal Serial ATA data cable. Good for connecting Serial ATA hard drive, Serial ATA removable rack to Serial ATA controller. | | |
| | |
|
| AASAIDC36I - Addonics 36" internal Serial ATA data cable | | $10.90 | |
| 36" internal Serial ATA data cable. | | |
| | |
|
 | AASAEDC3F - External Serial ATA data cable | | $23.10 | |
| 100 cm. external Serial ATA cable. Constructed with heavy duty shielding and connector to ensure reliable connection to external data storage devices. | | |
| | |
|
 | AASA2SAP15C - eSATA - SATA converter cable, 15 cm | | $21.30 | |
| Converter cable for adapting external standard SATA cable to the new External SATA (eSATA) connector. Require additional SATA cable to connect to standard SATA devices. This adapter cable is ideal for connecting SATA storage devices to controllers with eSATA ports such as the Addonics 4-port External SATA II PCI-X controller ADS3GX4R5-E. | | |
| | |
|
 | AAESAPSA15C - SATA -eSATA converter cable 15 cm | | $21.30 | |
| Converter cable for adapting the new External SATA (eSATA) connector into the internal standard SATA cable. Require additional eSATA-SATA cable to connect to standard SATA devices. This adapter cable is ideal for connecting eSATA storage devices to internal controllers with SATA ports such as the Addonics 4-port SATA II PCI controller ADSA4R5. | | |
| | |
|
 | AASA2SA100C - eSATA - SATA data cable, 100 cm | | $30.90 | |
| eSATA to SATA connecting cable, 100 cm. eSATA connector on one end and heavy duty SATA1 (regular SATA connector) on another end. Great for connecting external SATA storage device to eSATA port. | | |
| | |
|
 | AAESATA100C - eSATA - eSATA data cable, 100 cm | | $23.10 | |
| 100 cm. eSATA connecting cable with eSATA connectors on both ends. Full compliance with eSATA specification. Great for connecting external storage device with eSATA connectors to eSATA host controller. | | |
| | |
|
| AAESATA200C - eSATA - eSATA data cable, 200 cm | | $32.80 | |
| 200 cm. eSATA connecting cable with eSATA connector on both ends. Full compliance with eSATA specification. Great for connecting external storage device with eSATA connectors to eSATA host controller. | | |
| | |
|
 | AASATAB2 - 2 ports external SATA PCI bracket | | $16.70 | |
| PCI slot mounting bracket with two External Serial ATA connector to convert internal Serial ATA to external Serial ATA. 12" cable length. | | |
| | |
|
 | AASATAB2-E - 2-port eSATA PCI bracket | | $22.20 | |
| PCI bracket with 2 eSATA ports. Convert up to two internal SATA ports to two latest external SATA (eSATA) ports via 1 PCI slot. 12" cable length. | | |
| | |
|
 | AASATABLP-E - 1 port eSATA, low profile bracket | | $18.60 | |
| 1 eSATA port on PCI bracket. Include low profile bracket for mounting in small PC. Convert internal SATA port to external eSATA port via a PCI slot. | | |
| | |
|
 | AAIB4C300 - IB Multilane 4X SATA cable, 300 cm | | $182.00 | |
| Infiniband 4X Multilane SATA cable. 300 cm with secure thumb screws. Compliant with SFF 8470 and include SATA2 blocking keys. This 300cm Multilane cable works with Addonics Multilane controllers, adapters, and bridges. May not work with 3rd party devices. | | |
| | |
|
 | ADSAUSPCB - SATA-USIB converter kit | | $58.00 | |
| SATA to USIB Connector Kit. Includes 8" SATA data cable, Storage Tower power connector, and Mobile Rack power connector. Designed to mount onto Storage Tower back panel. | | |
| | |
|
 | AASA90L13C - Left angle 13 cm. int. SATA cable | | $12.60 | |
| Left angle 90 degrees 13 cm. internal SATA data cable. Good for connecting Serial ATA hard drive, Serial ATA removable rack to Serial ATA controller, particularly for very tight clearance | | |
| | |
|
 | AASAIDC8I - 8" internal Serial ATA data cable | | $10.90 | |
| 8" internal Serial ATA data cable. Good for connecting Serial ATA hard drive, Serial ATA removable rack to Serial ATA controller. | | |
| | |
|
 | AA4PMSAPC - 4P to mSATA power converter | | $24.00 | |
| Convert any Micro SATA device to use standard SATA data connector and 4-pin molex power connector. | | |
| | |
|
 | AA4PSSAPC - 4P to slim SATA power converter | | $23.10 | |
| Convert any Slim SATA device to use standard SATA data connector and 4-pin molex power connector. | | |
| | |
|
 | CABL-LSATA12RA1 - 12" latching sata cable - 1 Right Angle M/M | | $25.50 | |
| These right-angle Serial ATA cables guarantee you’ll be able to plug in your high-performance Serial ATA hard drives, no matter how tight your space is. Latching connectors provide secure connections for SATA hard drives and motherboards that support this feature.With their thin, narrow construction, these flexible cables improve airflow and reduce clutter in your case, helping to keep your case clean and cool. | | |
| | |
|
 | CABL-SATA18POW - 18 inch Serial ATA Data Cable with LP4 Adapter | | $19.80 | |
A combination data/power SATA cable.
The data segment of the cable uses the 7-pin SATA architecture to keep the cable ultra-thin, narrow, and flexible, giving you more room and better airflow inside your case. To power your drive, the SATA18POW features a convenient 15-pin SATA to 4-pin LP4 adapter that lets you connect your SATA drive to your existing power supply. SATA’s keyed connectors prevent broken or bent pins and allow a firmly seated connection with minimal pressure. | | |
| | |
|
 | AAESATAP30C - eSATAp cable, 30cm | | $36.70 | |
| 1 foot eSATAp connecting cable. Full compliance with eSATA specification. Great for connecting external storage device with eSATAp connectors to eSATAp host controller. | | |
| | |
|
 | AASA90L18I - Left angle 18" int. SATA cable | | $12.60 | |
| Left angle 90 degrees 18-inch internal SATA data cable. Good for connecting Serial ATA hard drive, Serial ATA removable rack to Serial ATA controller, particularly for very tight clearance. | | |
| | |
|
| AASA90R18I - Right angle 18" int. SATA cable | | $12.60 | |
| Right angle 90 degrees 18-inch internal SATA data cable. Good for connecting Serial ATA hard drive, Serial ATA removable rack to Serial ATA controller, particularly for very tight clearance. | | |
| | |
|
 | CABL-MCSATA12EXT - 12in Micro SATA Extension Cable - M/F | | $39.20 | |
| This 12in Micro SATA Extension Cable features one male and one female Micro SATA data connector, allowing you to extend a micro SATA device connection by up to 1ft.A cost-effective solution, the extension cable not only simplifies drive installation by overcoming typical connection limitations, but also reduces the risk of damage to the drive or motherboard micro SATA connectors that could result from straining or "stretching" the cable to make the necessary data connection. | | |
| | |
|
 | CABL-MCSATAF12S - 12in Micro SATA to SATA with SATA Power Adapter Cable - F/F | | $35.00 | |
| 12in Micro SATA to SATA adapter cable features a standard female SATA data connector and a SATA power connector on one end, and a micro SATA male connector on the other, letting you connect a 1.8in SSD (Solid State Drive) to a computer as you would a standard SATA form factor hard drive. The Micro SATA/SATA adapter supports both 3.3V and 5V SSD Drives. | | |
| | |
|
 | CABL-MCSATAM12 - 12in Micro SATA to SATA with LP4 Power Cable Adapter - M/F | | $35.00 | |
| This 12in Micro SATA to SATA with LP4 Power Adapter cable lets you connect a regular Serial ATA equipped hard drive through a Micro SATA data connector provided by a motherboard as well as to the computer power supply through an LP4 connection. A cost-effective compatibility solution, the Micro SATA/SATA adapter cable eliminates the expense of having to upgrade the motherboard for compatibility with a Micro SATA drive. | | |
| | |
|
 | CABL-SLSATAM20 - 20in Slimline SATA to SATA Adapter with LP4 | | $35.00 | |
| This slimline SATA to SATA Adapter Cable features one SATA (7-pin) female data connection as well as an LP4 power connection on one end, and a slimline Serial ATA male connection on the other - allowing you to connect a motherboard equipped with a Slimline SATA connector to a standard Serial ATA Drive. | | |
| | |
|
 | CONN-MCSATAADAP - Micro SATA to SATA Adapter Cable with Power - F/M | | $36.20 | |
| This Micro SATA to SATA adapter lets you connect a 5V or 3.3V Micro SATA hard drive to a standard SATA controller and SATA power supply connection, providing both data and power to the drive. | | |
| | |
|
*All prices are in New Zealand Dollars and exclude GST & freight. Reseller enquiries welcome. |
|
| USB Cables |
|
| AAUSBC-309-3F - USB 2.0 USIB interface cable, 3 feet | | $55.00 | |
| 3-foot USB 2.0/1.1 USIB interface cable. Replacement for AAUSBC-308-3F. Can be used on any Addonics storage device equipped with the USIB connector. | | |
| | |
|
| AAUSBC-309 - USB 2.0 USIB interface cable | | $55.00 | |
| USB 2.0/1.1 USIB interface cable. Replacement for the previous part # AAUSBC-308. This cable can be used on any Addonics storage products equipped with the USIB connector. | | |
| | |
|
| AAUSB308-4C - Addonics Bundle of 4 USB 2.0 USIB cables | | $208.00 | |
| 4 Addonics USB 2.0 USIB interface cables bundled in a corrugated tubing. Cable length - 6 feet. Designed to use with Addonics 4 slot UDD or multiple Addonics storage devices with USIB-36 connector. | | |
| | |
|
 | AD5PUSBA - USB pin header to dual USB adapter | | $22.80 | |
| Convert USB pin header commonly found on motherboard to 2 standard USB type A connectors | | |
| | |
|
 | AAUSB-EXT6F - Addonics USB Extension Cable 6 Feet | | $14.10 | |
| 6 feet long USB Extension Cable. | | |
| | |
|
 | AAU2REPEAT16 - USB 2.0 16 feet repeater cable | | $50.00 | |
| This USB 2.0 repeater cable is an active extension cable that extends the distance between the USB device and the computer up to 16 feet. Unlike ordinary USB extension cable, this USB repeater cable assures signal quality and maintains electrical and timitiming specifications are in full compliance with USB 2.0/1.1 standard at the end of the 16 feet distance. Power directly from USB port, up to 5 of this USB Repeater cables can be chained together for a maximum distance up to 80 feet. | | |
| | |
|
 | AAUSB5F - Addonics USB adapter cable for MB USB connection | | $13.00 | |
| USB adapter cable for connecting to the 5-pin USB connector on motherboards. Designed to connect Addonics USB 2.0 interface cable (AAUSB-308) to USB port on motherboard. Great for connecting any device with standard USB connector to internal USB ports commonly found on the latest motherboards. | | |
| | |
|
 | AAUSB51M - Addonics USB adapter cable to standard USB port | | $17.00 | |
| Connecting cable for Internal USB 2.0 DigiDrive, AEIDMDU2 or AEIDMDU2B, to standard USB output connector. | | |
| | |
|
 | AHUSB2/4P - Addonics Power Plus USB 2.0 4-port hub | | $64.00 | |
| 4 ports USB 2.0 hub with adequate USB power for any Addonics Pocket Series devices and other self power USB peripheral device. | | |
| | |
|
 | AAUSBAB6F - USB A-B cable 6 feet | | $16.50 | |
| 6 feet USB 2.0 A-B cable. Compatible with Addonics Storage Tower ST4IDEU2, external drive enclosure AE5IDECSU2, AE5IDECSUF, AE5SACSU2 and AE5SACSUF. Can also be used as a replacement USB printer cable. | | |
| | |
|
 | AA5PUSBCL-3F - 3' USB cbl, female pin header both ends | | $9.47 | |
| USB 5-pin header to 5-pin header 3 feet cable. Suitable for connecting any device with USB 5-pin header connector to 5-pin header connector on system board. | | |
| | |
|
 | CABL-MUSBCARCH - MiniUSB Car Charger for Mobile Devices | | $36.80 | |
| The ideal mobile power solution, StarTech.com's MiniUSB Car Charger for Mobile Devices offers a convenient way to charge your cellular phone, PDA, GPS, or portable media player while you're on the road. Compatible with Blackberry and Motorola phones, as well as a broad selection of other devices that charge via a MiniUSB port, MUSBCARCH is backed by a Lifetime Warranty to ensure lasting quality. | | |
| | |
|
*All prices are in New Zealand Dollars and exclude GST & freight. Reseller enquiries welcome. |
|
| Firewire Cables |
|
| AAFWC-406 - Addonics Firewire cable - USIB interface | | $87.00 | |
| Firewire USIB interface cable for Addonics Pocket and Mobile Series storage devices. | | |
| | |
|
 | AAFWUSBPC12 - Addonics Firewire Y-cable | | $21.20 | |
| Firewire connecting cable that has USB connection for power and iLink connection for data. This cable is for the Firewire Mini DigiDrive or any 5V Firewire devices. | | |
| | |
|
 | AAFWC6F4M - 6-4 pin Firewire cable | | $17.30 | |
| Convert standard 6-pin Firewire connector to 4-pin (iLink) connector. | | |
| | |
|
| AAFWC-406R - Firewire/iLink USIB interface cable | | $81.00 | |
| USIB Firewire cable, 6 feet and RoHS compliant. Replace previous part # AAFWC406. | | |
| | |
|
| AAFW-4C - bundle of 4 Firewire USIB cabes | | $305.00 | |
| 4 3-foot Firewire/iLink USIB interface cables bundled in corrugated tubing. For use with Addonics Storage Tower | | |
| | |
|
*All prices are in New Zealand Dollars and exclude GST & freight. Reseller enquiries welcome. |
|
| SCSI Cables |
|
 | AALVD320-3 - Addonics 3 connector U320 Cable | | $64.00 | |
| LVD320 Ultra SCSI cable. Support data transfer rate of 320 MBps. 3 connectors. | | |
| | |
|
*All prices are in New Zealand Dollars and exclude GST & freight. Reseller enquiries welcome. |
|
| IDE |
|
 | AA2IDE80-12 - 12" Ultra IDE ribbon cable, 3 connectors | | $10.90 | |
| 12" UDMA 80-pin IDE ribbon cable with 2 female 40-pin IDE connectors for master ans slave device. | | |
| | |
|
 | AAIDE80-8 - 8" ATA66/100/133 flat ribbon cable | | $13.20 | |
| UDMA IDE ribbon cable, 8" with 40-pin female IDE connector on each end. Replacement part for Storage Tower with USIB connector. Good for ATA33/66/100/133 IDE hard drives | | |
| | |
|
 | AAIDE80-3 - 3" ATA66/100/133 flat ribbon cable | | $11.40 | |
| UDMA IDE 80-pin ribbon cable with 40-pin female connector at each end of the cable. Total length 3". Replacement drive interface cable for the Addonics DigiCopier. | | |
| | |
|
*All prices are in New Zealand Dollars and exclude GST & freight. Reseller enquiries welcome. |
|
| Network Cable |
|
 | AARJ45MF15 - RJ45 male - female 15" CAT6 cable | | $37.40 | |
| For connecting the ethernet ports on the iSCSI subsystem to the backpanel on Storage Tower and Storage Rack. | | |
| | |
|
*All prices are in New Zealand Dollars and exclude GST & freight. Reseller enquiries welcome. |
|
| Serial |
|
 | CABL-PLATE9M16 - 9-pin Serial to 10-pin Header Slot Plate - 16 inches | | $17.40 | |
| Conforms to Apex10-Everex-Intel Specification | | |
| | |
|
*All prices are in New Zealand Dollars and exclude GST & freight. Reseller enquiries welcome. |